Cleanpower 10

High-performance lime remover for cooling systems

CLEANPOWER 10
  • Non-foaming
  • With special corrosion inhibitors
  • Removes lime, rust and other deposits


Cleanpower 10
is excellently suitable for the cleaning of cooling and heating systems and boilers.

Instructions for use:
Drain the cooling system until a pumpable volume remains in the system. Approx. 10% of this volume of Cleanpower 10 is needed altogether for the cleaning procedure. First add approx. 4 to 5 % Cleanpower 10 till a pH value of 1 is achieved. Then add more Cleanpower 10 until the pH value does not rise any further. Pump the cleaning solution for 1 hour, while pH value should be between 1 and 2, then adjust the pH value to 6,5 – 9 with Cleanpower Neutral 20. To neutralize the cleaning solution, approx. 50 to 60% of the volume of the used Cleanpower 10 is needed. Drain the system completely, rinse with water (add 1 L RESPA / 1 m³ water) to remove all deposits then refill the system. When applying on aluminum, chromium or brass, please test before use and reduce contact time to a minimum. After the application rinse thoroughly with water.

Do not use on acid-sensitive materials.


© 2020 Tech Industry Bulgaria EOOD. All rights reserved.
DMC Firewall is developed by Dean Marshall Consultancy Ltd